Tehnični podatki

  1. steel ball
  2. lead screw
  3. rack
  4. hex head socket set screw
  5. round head hex socket screw
  6. round head hex socket screw
  7. clamping board
  8. live jaw
  9. live jaw plate
  10. fixed jaw plate
  11. fixed jaw
  12. round head hex socket
  13. round head hex socket screw
  14. sping
  15. body
Item Tolerance
Squareness
of fixed jaw
plate to
sides
0.02

 

Item Tolerance
Squareness
of two sides
to base
surface
0.008

 

Item Tolerance
Parallelism
error of jaw
plates
0.005
/100

 

Item Tolerance
Squareness
of two jaw
plates to
base surface
0.005

 

Application and property

This unit is made from best quality alloy steel. Work surface is hardened with fine roughness. With changeable base, fixed jaw, live jaw, it facilitates the operation with high accuracy of clamping, and is widely used in CNC and other machines.

 

Method and step

1. Fist choose proper vise according to
work piece and locate it on the table.
2. Then let rack (03) free by loosing hex
head socket set screw (04) in
3. Move rack (03) to have the steel ball (01)
down in the set hole of the body in proper
clamping position due to the size of work
pieces.
4. And then drive the hex head socket set
screw (04) to tighten, the steel ball (01)
and hold the rack(03).
5. Put the work piece on, turn lead screw(02) to move live jaw(0 8 ) to re alize the clamping

Note

1. This is a precision vise. Work table accuracy should be within 0.005mm
2. It is suggested that the vise is fixed to work table by clamping inserts.

Maintenance

Rotary parts and sliding parts should be often lubricated continually. If long time stored, they should be cleaned, coated with oil and packed in plastic bags.

Packing List

1. Type GT vise: 1
2. Box wrench: 1
3. T-wrench: 1
4. Vise holding clamps: 4
5. Work stop with main bolt: 1
6. Positioning key nuts: 2
7. Technical documents:
    Operation instruction: 1
    Certificate of Quality: 1
    Packing List: 1

Item Tolerance
Squareness
of fixed jaw
plate to
sides
0.02

 

Item Tolerance
Squareness
of two sides
to base
surface
0.008

 

Item Tolerance
Squareness
of two sides
to base
surface
0.008

 

Item Tolerance
Squareness
of two sides
to base
surface
0.008

 

Have A Question?

8 + 11 =